HMMSS ROD END

DIN ISO 12240-4 (DIN 648) – Metric sizes. Patent applied for.

For a quotation, please contact us.

Material

Body and Stud BS. 970 230M07Pb leaded low carbon steel equivalent SAE 12L14, 95 Mn Pb 28K, tensile strength 430-500N/mm2, 60,000-72,000psi.
Bearing Burnished.
Bearing race Injection moulded Polyurethane.

Protective Finish

Body Zinc plated and yellow passivated.
Stud Nitrotec NQ40 protection with PTFE lubricant. Operating temperature: -40 to +80°C with excursions to 100°C.

Details

• DIN ISO 12240-4 (DIN 648)
• Polyurethane bearing race and Nitrotec surface protection with PTFE lubricant on bearing provide superior shock and wear properties combined with excellent chemical and corrosion resistance.
• Exceptional axial and radial loads and safety feature give confidence in load bearing applications.
• Subject to quantity, special threaded bodies and studs are available.
• Hexagon form of studs facilitates assembly.
• Recommended for applications where misalignment may arise in an assembly.
• HM is also available with female bodies and without studs, please see HMF, HMFSS andHMM Rod End.
• Inch sizes of this range are shown in the inch section.
• Subject to quantity, special threaded bodies and ball studs are available. Please contact us.