All Products >> Metric >> BM Ball Joints

Product Details

BM BALL JOINT

Based on DIN 71802 & 71803 – Metric sizes

For a quotation, please contact us.

Material

Body Grey Nylon 12 loaded with Graphite.
Ball stud BS. 970 230M07Pb leaded low carbon steel equivalent SAE 12L14, 95 Mn Pb 28K, tensile strength 430-500N/mm2, 60,000-72,000psi.

Protective Finish

Ball stud Zinc plated and yellow passivated. The assembly is lubricated.

Details

  • Body moulded complete in one piece.
  • Lightweight and low cost.
  • High strength to weight ratio.
  • Graphite additive ensures permanent lubrication.
  • Additional cost saving opportunity by insert molding the ball joint directly on to a linkage rod – please ask us about this speciality.
  • An optional polychloroprene gaiter available to help resist dirt ingress avialable upon request.
  • BM Ball Joint is available without a ball stud for assembly on to a pre-positioned stud.
  • Spanner flats on bodies and ball studs facilitate assembly.
  • Burnished ball for smoother operation.
  • Subject to quantity, special threaded bodies and ball studs are available. Please contact us.
METRIC PRODUCT LIST – BM BALL JOINT
Part No Thread ISO A B C D F G H J K L M N Thread ISO P Q Ball Dia.Ø Weight per 100 in Lbs
BM 5 M5x0.8 26.0 20 12 10 12.0 8 9 4.0 25.2 7 8 M5x0.8 10.2 8 1.5
BM 6 M6x1.0 31.2 24 14 12 14.5 10 11 5.0 30.8 8 10 M6x1.0 12.5 10 2.6
BM 8 M8x1.25 39.0 30 17 15 18.0 13 13 6.5 38.5 11 13 M8x1.25 16.5 13 6.4