GI & GIL CLEVIS

Similar to DIN 71802 Standard & Long Series – Inch sizes

For more information, please contact us.

Low carbon steel.

RoHS compliant zinc plated and clear trivalent passivated.

Similar to DIN 71802.
GI Clevises, machined for precision, are available in both standard and long series.
Cross hole deburred on all four faces to facilitate assembly of clevis pin.
Sizes up to GIL625 are compatible with ESI Spring Pins or NBI Clevis Pins.
Sizes GI750 and GI1000 are used with the DEI Pins.
Inch sizes are easily identified by the groove on the tail.
Metric sizes of this range are shown in the metric section.
We welcome inquiries for left hand threads and non-standard Clevises. Please contact us.
Please contact us if your application may require the connection rod to run into the slot.

INCH PRODUCT LIST – GI & GIL CLEVIS
Part No	Thread UNF (K)	A	Ø B	Width C	D	E	F	Ø G	H	Weight per 100 in Lbs
Tolerances:		+.012 -.006	+.0024 -0	Nominal	±0.02	±0.02	±0.02	±0.012	±0.02
GI 187	10-32	0.375	0.1875	0.1875	0.394	1.024	0.394	0.354	0.295	2.0
GIL 187	10-32	0.375	0.1875	0.1875	0.787	1.417	0.394	0.354	0.295	2.6
GI 250	1/4	0.500	0.250	0.250	0.472	1.220	0.472	0.394	0.354	3.5
GIL 250	1/4	0.500	0.250	0.250	0.945	1.693	0.472	0.394	0.354	4.6
GI 312	5/16	0.630	0.3125	0.3125	0.630	1.654	0.630	0.551	0.472	8.2
GIL 312	5/16	0.630	0.3125	0.3125	1.260	2.283	0.630	0.551	0.472	11.0
GI 375	3/8	0.750	0.375	0.375	0.787	2.047	0.787	0.708	0.591	15.0
GIL 375	3/8	0.750	0.375	0.375	1.575	2.834	0.787	0.708	0.591	21.1
GI 500	1/2	1.000	0.500	0.500	1.102	2.834	1.102	0.945	0.886	37.0
GIL 500	1/2	1.000	0.500	0.500	2.205	3.976	1.102	0.945	0.886	52.4
GI 625	5/8	1.250	0.625	0.625	1.260	3.268	1.260	1.024	0.945	61.0
GIL 625	5/8	1.250	0.625	0.625	2.520	4.528	1.260	1.024	0.945	87.3
GI 750	3/4	1.575	0.750	0.750	1.575	4.134	1.575	1.339	1.181	129.0
GI 1000	1	1.970	1.000	1.000	1.969	5.197	1.969	1.654	1.417	240.3