All Products >> Metric >> GM & GML Clevises

Product Details

GM & GML CLEVIS

Standard & Long Series based on DIN 71752 – Metric sizes

For more information, please contact us.

Material

Low carbon steel.

Protective Finish

RoHS compliant zinc plated and clear trivalent passivated.

Details

  • Based on DIN 71752.
  • GM Clevises, machined for precision, are available in both standard and long series.
  • Threads and pitches are to ISO standards coarse or fine.
  • Cross hole deburred on all four faces to facilitate assembly of clevis pin.
  • Sizes up to GML 16 are compatible with ESM Spring Pins or NBM Clevis Pins.
  • Sizes GM 18, GM 20, GM 25 and GM 30 are used with DEM Pins, Size GM 20 may also be used with ESM 20.
  • Please contact us if your application may require the connection rod to run into the slot.
  • Inch sizes of this range are shown in the inch section.
  • For Stainless Steel Clevis Assemblies, please contact us.
  • We welcome inquiries for left hand threads and non-standard Clevises. Please contact us.

 

 

METRIC PRODUCT LIST – GM & GML CLEVISES
Part No Thread K ISO Pitch A Ø B  Width C  D E F Ø G H Weight per 100 in Lbs
Coarse Fine
Tolerances:
 +0.30  -0.16 +0.06/-0.00 Nominal ±0.5 ±0.5 ±0.5 ±0.3 ±0.2
GM 4 M4 0.7 – 8 4.00 4 8 21 8 8 6 0.7
GML 4 M4 0.7 – 8 4.00 4 16 29 8 8 6 1.5
GM 5 M5 0.8 – 10 5.00 5 10 26 10 9 7.5 2.0
GML 5 M5 0.8 – 10 5.00 5 20 36 10 9 7.5 2.9
GM 6 M6 1.0 – 12 6.00 6 12 31 12 10 9 3.1
GML 6 M6 1.0 – 12 6.00 6 24 43 12 10 9 4.6
GM 8 M8 1.25 – 16 8.00 8 16 42 16 14 12 7.9
GML 8 M8 1.25 – 16 8.00 8 32 58 16 14 12 11.5
GM 10 X 1.5 M10 1.5 20 10.00 10 20 52 20 18 15 16.1
GM 10 X 1.25 M10 1.25 20 10.00 10 20 52 20 18 15 16.1
GML 10 X 1.5 M10 1.5 20 10.00 10 40 72 20 18 15 22.1
GML 10 X 1.25 M10 1.25 20 10.00 10 40 72 20 18 15 22.1
GM 12 X 1.75 M12 1.75 24 12.00 12 24 62 24 20 18 25.4
GM 12 X 1.25 M12 1.25 24 12.00 12 24 62 24 20 18 25.4
GML 12 X 1.75 M12 1.75 24 12.00 12 48 86 24 20 18 36.6
GML 12 X 1.25 M12 1.25 24 12.00 12 48 86 24 20 18 36.6
GM 14 X 2.0 M14 2.0 27 14.00 14 28 72 28 24 22.5 37.5
GM 14 X 1.5 M14 1.5 27 14.00 14 28 72 28 24 22.5 37.5
GML 14 X 2.0 M14 2.0 27 14.00 14 57 101 29 24 22.5 54.7
GML 14 X 1.5 M14 1.5 27 14.00 14 57 101 29 24 22.5 54.7
GM 16 X 2.0 M16 2.0 32 16.00 16 32 83 32 26 24 58.7
GM 16 X 1.5 M16 1.5 32 16.00 16 32 83 32 26 24 58.7
GML 16 X 2.0 M16 2.0 32 16.00 16 64 115 32 26 24 85.8
GML 16 X 1.5 M16 1.5 32 16.00 16 64 115 32 26 24 85.8
GM 18 X 2.5 M18 2.5 36 18.00 18 36 94 36 30 27 86.0
GM 18 X 1.5 M18 1.5 36 18.00 18 36 94 36 30 27 86.0
GM 20 X 2.5 M20 2.5 40 20.00 20 40 105 40 34 30 121.9
GM 20 X 1.5 M20 1.5 40 20.00 20 40 105 40 34 30 121.9
GM 25 X 3.0 M24 3.0 50 25.00 25 50 132 50 42 36 244.8
GM 25 X 2.0 M24 2.0 50 25.00 25 50 132 50 42 36 244.8
GM 28 X 3.0 M27 3.0 55 28.00 28 56 148 56 48 40 330.8
GM 28 X 2.0 M27 2.0 55 28.00 28 56 148 56 48 40 330.8
GM 30 X 3.5 M30 3.5 60 30.00 30 60 160 60 52 42 427.8
GM30 X 2.0 M30 2.0 60 30.00 30 60 160 60 52 42 427.8