HIF ROD END

As DIN ISO 12240-4 (DIN 648) but with UNF threads – Inch sizes. Patent applied for.

For a quotation, please contact us.

Material

Body, Stud and bearing BS. 970 230M07Pb leaded low carbon steel equivalent SAE 12L14, (9s Mn Pb 28K) tensile strength 430-500N/mm2.
Bearing Burnished.
Bearing race Injection molded Polyurethane.

Protective Finish

Body Zinc plated and clear passivated.
Bearing Nitrotec NQ40 protection with PTFE lubricant. Operating temperature: -40 to +80C with excursions to 100C.

Details

• Similar to DIN ISO 12240-4 (DIN 648)
• Wrench flat position may vary from perpendicular to parallel to the face of the rod end.
• Polyurethane bearing race and Nitrotec surface protection with PTFE lubricant on bearing provide superior shock and wear properties combined with excellent chemical and corrosion resistance.
• Exceptional axial and radial loads and safety feature give confidence in load bearing applications.
• For optimum performance in load bearing applications ensure that Rod End is mounted with the molded lettering facing away from the direction of pull.
• HI is also available with male bodies and without studs, please see HIFS, HIM and HIMS Rod End.
• Metric sizes of this range are shown in the metric section.