All Products >> Inch >> ILIM In-Line Ball Joint

Product Details

ILIM IN-LINE BALL JOINT

BASED ON DIN 71802 – INCH SIZES

For a quotation, please contact us.

Material

Body & Ball Stud Low carbon steel, tensile strength 415-435N/mm2
Bearing surface Burnished
Liner Polyurethane

Protective Finish

Body and Ball Stud Zinc plated and yellow passivated. The assembly is lubricated with a high performance lithium grease.
Operating temperature -40 to + 176°F with excursions to 212°F

Details

  • Based on DIN 71802 – INCH sizes
  • The Polyurethane Liner combined with a High Performance grease provide superior wear properties combined with excellent chemical resistance.
  • Polychloroprene Gaiter helps resist dirt ingress.
  • Wrench flats on Body and Ball Stud facilitates assembly.
  • Burnished ball provides smooth operation.
  • Subject to quantity, special threaded bodies and ball studs are available.
  • Also available with female threaded bodies and in inch sizes.
INCH PRODUCT LIST – ILIM IN-LINE BALL JOINT
Part No Thread UNF A Ball Dia. Ø C D E F G H J M Thread UNF P Q X Weight per 100 in Lbs
ILIM 250 1/4 .394 1.040 .492 .160 .315 .582 .394 .433 .315 1/4 .492 23/30 6.2
ILIM 312 5/16 .513 1.280 .650 .200 .433 .760 .513 .513 .433 5/16 .650 23/30 10.8
ILIM 375 3/8 .630 1.535 .787 .200 .550 .945 .630 .630 .550 3/8 .787 23/30 18.3