Product Details
ILMF IN-LINE BALL JOINT
For a quotation, please contact us.
Material
Body & Ball Stud Low carbon steel, tensile strength 415-435N/mm2
Bearing surface Burnished
Liner Polyurethane
Protective Finish
Body and Ball Stud Zinc plated and yellow passivated. The assembly is lubricated with a high performance lithium grease.
Operating temperature -40 to + 176°F with excursions to 212°F
Details
- Based on DIN 71802 – INCH sizes
- The Polyurethane Liner combined with a High Performance grease provide superior wear properties combined with excellent chemical resistance.
- Polychloroprene Gaiter helps resist dirt ingress.
- Wrench flats on Body and Ball Stud facilitates assembly.
- Burnished ball provides smooth operation.
- Subject to quantity, special threaded bodies and ball studs are available.
- Low cost alternative to IMG series.
- Also available with female threaded bodies and in inch sizes.
| METRIC PRODUCT LIST – ILIF IN-LINE BALL JOINT | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Part No | Thread ISO A | Ball Dia. Ø | C | D min | E | F | G | H | J | M | Thread ISO P | Q | X | Weight per 100 in Lbs | |
| ILMF 6 | M6X1.0 | 10.0 | 25.0 | 11.5 | 6.0 | 8.0 | 14.8 | 10.0 | 11.0 | 8.0 | M6X1.0 | 12.5 | 23/30 | 6.2 | |
| ILMF 8 | M8X1.25 | 13.0 | 30.0 | 14.0 | 8.0 | 11.0 | 19.3 | 13.0 | 13.0 | 11.0 | M8X1.25 | 16.5 | 23/30 | 10.8 | |
| ILMF 10 | M10X1.5 | 16.0 | 35.0 | 15.5 | 10.0 | 14.0 | 24.0 | 16.0 | 16.0 | 14.0 | M10X1.5 | 20.0 | 23/30 | 18.3 | |