Product Details
NBM MACHINED CLEVIS PIN
Use with Clevises based on DIN 71752 – Metric sizes
For a quotation, please contact us.
Material
BS. 970 230M07Pb leaded low carbon steel equivalent SAE 12L14, 95 Mn Pb 28K, tensile strength 430-500N/mm2, 60,000-72,000psi.
Protective Finish
Zinc plated and yellow passivated.
Details
- Designed for use with GM Clevises.
- NBM Pin lead-in chamfer helps assembly into the Clevis and subsequent fastener assembly.
- Fasten with either SLM Fasteners or KLM clips.
- Inch sizes of this range are shown in the inch section.
- Subject to quantity, special Clevis Pins are available including Hardened and Cross Hole versions. Please contact us.
| METRIC PRODUCT LIST – NBM MACHINED CLEVIS PINS | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Part No | Ø A | B | C | Ø D | E | F | Ø H | M | N | Weight per 100 in Lbs |
| NBM 4 | 4.00/ 3.93 |
8.250/ 8.125 |
1.5 | 6 | 0.50 | 0.74/ 0.64 |
3.2/ 3.1 |
0.75 | 2.1 / 1.9 | 0.26 |
| NBM 5 | 5.00/ 4.93 |
10.250/ 10.125 |
1.0 | 8 | 0.50 | 0.84/ 0.64 |
4.1/ 3.9 |
0.50 | 2.6 / 2.4 | 0.66 |
| NBM 6 | 6.00/ 5.93 |
12.250/ 12.125 |
1.5 | 9 | 0.75 | 0.84/ 0.64 |
5.1/ 4.9 |
0.75 | 3.1 / 2.9 | 0.88 |
| NBM 8 | 8.00/ 7.91 |
16.250/ 16.125 |
2.0 | 12 | 1.00 | 1.04/ 0.84 |
6.1/ 5.9 |
1.00 | 3.6 / 3.4 | 1.9 |
| NBM 10 | 10.00/ 9.91 |
20.250/ 20.125 |
2.5 | 14 | 1.00 | 1.15/ 0.95 |
8.2/ 7.8 |
1.25 | 4.6 / 4.4 | 3.9 |
| NBM12 | 12.00/ 11.89 |
24.250/ 24.125 |
3.0 | 16 | 1.25 | 1.25/ 1.05 |
9.2/ 8.8 |
1.25 | 5.1 / 4.9 | 6.6 |
| NBM 14 | 14.00/ 13.89 |
27.250/ 27.125 |
3.0 | 18 | 1.25 | 1.35/ 1.15 |
||||