All Products >> Metric >> QM Ball Joints

Product Details

QM QUICK RELEASE BALL JOINT

Metric equivalent to SAE J490 Style 1 – Metric sizes

For a quotation, please contact us.

Material

Body, shield and ball stud Low carbon steel, tensile strength 415-435N/mm2, 60,000-63,000psi. Body and ball stud are case hardened.
Spring 302 S 26 stainless steel, equivalent AISI 302.

Protective Finish

Body, shield and ball stud Zinc plated and yellow passivated; body and ball stud de-embrittled. The assembly is lubricated.

Details

  • Metric equivalent to SAE J490 Style 1 – detachable ball joints.
  • The spring loaded outer shield allows both rapid release and reconnection of the ball stud. Linkage assemblies can be installed or removed without disturbing pre-set centers.
  • QM Ball Joint is available without the ball stud for assembly to a pre-positioned ball stud. The ball studs are also available separately.
  • Hexagon form of studs facilitates assembly.
  • Knurled shields, to assist grip, will be introduced to eventually become standard to all sizes.
  • Inch sizes of this range are shown in the inch section.
  • Subject to quantity, special threaded bodies and ball studs are available. Please contact us.

 

METRIC PRODUCT LIST – QM QUICK-RELEASE BALL JOINT
Part No Thread ISO A B C D G H J K L M Thread ISO P Q Ball Dia. Ø Weight per 100 in Lbs
QM 5 M5x0.8 28 23.0 11.1 11.1 7.9 11.9 4.35 28.6 8 M5x0.8 11.1 6.35 3.7
QM 6 M6x1.0 30 24.6 13.0 13.6 9.4 12.6 4.95 33.4 10 M6x1.0 14.3 7.9 5.5
QM 8 M8x1.25 40 31.7 14.3 16.3 11.1 15.2 5.80 40.6 11 M8x1.25 17.5 8.6 10.5
QM 10 M10x1.5 49 39.7 27.0 19.6 14.1 19.8 6.85 51.4 13 M10x1.5 22.2 10.7 17.1